Precautions for the use of vibrating plate

Vibration plate is an auxiliary equipment of automatic assembly machinery, which can discharge various products in an orderly manner. It can cooperate with automatic assembly equipment to assemble various parts of the product into a complete product. To order a suitable vibrating plate, the specific operation items of the vibrating plate are very important for companies that commonly use precision vibrating plates, how to operate and maintain it correctly, but there is another important issue that needs to be paid attention to. Yes, that is the precautions before use.

    Generally speaking, the precautions for the use of vibrating plate are as follows:

(1) After receiving the equipment, when opening the package, check whether the vibrating plate as a whole meets the customer's various indicators and requirements. If not, you should immediately contact the manufacturer to solve it. If all are met, you can start the following steps

(2) After adjusting the height and level of the vibrating plate, fasten the lower seat to the bracket or fixed plate, and the overall operation is stable

(3) Next, when the outlet of the vibrating plate is connected with the corresponding interface, a certain gap should be left to avoid affecting the function of the vibrating plate

(4) In addition, the vibration plate is an aviation plug installed on the control box, turn on the 220V or 110V power supply, turn on the switch and slowly turn the regulator, and gradually reach the required feeding quantity. (Note: The electric control box must be waterproof and oil-proof. Before turning on the power, the adjustment must be adjusted to the minimum value to avoid damaging the thyristor. The gap between the electromagnet and the top cover, elastic elements and various indicators are before leaving the factory. It has been adjusted, and it is not necessary to adjust under normal circumstances.

    The working principle of the vibrating plate: there is a pulse electromagnet under the vibrating plate hopper, which can make the hopper vibrate in the vertical direction, and the inclined spring plate drives the hopper to make torsional vibration around its vertical axis. Due to this vibration, the parts in the hopper rise along the spiral track until they are sent to the discharge port. Its working purpose is to automatically and orderly arrange the disordered workpieces neatly and accurately to the next process through vibration.